obd2tool's blog: 三月 2018

2018年3月18日星期日

GM Tech2 pass-through or go-between Process to Program A Module

For users with GM Tech2 scan tools:
If you are wanting to system a module, you will find two solutions. One particular is pass-through as well as the other is employing the Tech two as a go-between.
In detail… look here:
The pass-through will be to use having a laptop inside the car and it just utilizes the Tech two as the connection involving. This is the quickest and easiest technique to do it.
That is certainly, the data are directly downloaded from the Pc towards the ECU inside the car.
While the tech2 diagnostic scanner is still necessary within the mode, the data entry as well as the download control is carried out directly at the pc. Altogether, the approach is more rapidly, and it really is advisable when a pc with TIS2000 computer software is inside 3m of a car.
1. Connect Tech 2 for the vehicle.
2. Connect Tech 2 for the Computer switch on Tech two.
3. Start off TIS 2000 around the Computer.
four. Choose the icon ‘Service Programming System’ (Fig. 1) on the TIS2000 get started web page.
5. Commence TIS 2000 on the Computer.
six. Around the screen ‘Select Diagnostic Tool and Programming Process’ (See image beneath) make a selection for
***Pass-Thru mode
***the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU
***the ECU place.
Then clock ‘Next’ button.

The go-between system is for once you can’t bring the laptop in to the vehicle and uses the gm Tech2 scanner as a go-between. You connect the Tech 2 to the vehicle and download the module facts which you wish to system. Then you definitely disconnect, run towards the personal computer running professional diagnostic tool Tis2000, connect it towards the laptop or computer and download the programming data for that module, disconnect once more and run back to the automobile, connect it and it automatically programs the module. It can take a lengthy time depending around the module (PCM will be the longest).
Have entertaining in gm tech 2 programming!

http://obd2tool88.egloos.com/6311441

2018年3月2日星期五

Top Reasons to Get MB Star SD C4C5 and Laptop Full Package

Here list reasons why you should buy a Benz MB Star diagnostic tool with a laptop full package:
—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for mb star sd c4 purposes…
—Bought an older Dell D630 laptop with a serial port and plan on buying MB SD Connect C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.
—Benz Star diagnosis C3 / C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.
—If your ever in the market for a faster SDS laptop, the Dell D630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.
—the HDD that is pre-loaded with the software for SDConnect 4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.
—Need to connect directly into a RS232 port without using an interface – this is why I went for the complete system with laptop.
—The software Xentry/ DAS is a bit slow on an old IBM so that it is worth paying a bit extra and getting a Dell D630.
—There is a very specific set of COM ports you must use for it to work. For example you need DAS to be looking at COMx within the VM session, then VMware needs to redirect that to COMx which is a ‘physical’ serial port on your machine.
—It’s probably because it has a real com port. Most laptops these days have just a USB port and things don’t always work right if you’re using a USB to RS-232 converter. You wouldn’t want to brick a component during an update if you’re using USB. The other option would be to get a C4 system, but then they cost more. I think there are a couple other systems out there like IBM that also have real com ports.
—The PART D mux(C3) is a serial ported mux—that’s the reason for the Dell and IBM older laptops.
—The PART W mux(SD connect C4) is and Ethernet/wifi connected system and that is the reason for use on other laptops—the issue is the operating system currently DAS Xentry only runs on XP.
—Plug and play!! It is more convenient for users because the software for C3/SD C4 diagnostic tool will be pre-installed before delivery.
Here are MB STAR diagnostic kits (tool+laptop) for sale:
all software pre-installed!!!
ready for use!!!
2017.12 Version MB SD Connect C4/C5 Star Diagnosis Plus Panasonic CF19 Laptop With Vediamo and DTS Engineering Software