MB SD C4 Tourismo bus communication error (fixed)

I bought the MB SD C4+Dell D630 Laptop pre-installed bundle, when I test it have the problem SD Connect C4 cannot power on when connected with  Tourismo bus, I contacted there customer service at obd2toolcom, and here is the solution provided by their engineer.
I will explain my problem in detail:
” I have tried 2 different mb sd connect c4 on Tourismo buses and sd connect does not power on.In the meantime those MB SD Connect C4 works normally to any other MB Truck and car.also on Tourismo have check Mb Star C3 and works normally.”
You should check:
bus with OBD
pin 4 + 5
both must be connected and ground
In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.
“i’m getting an communication error when connecting xentry to a tourismo.”

A Communication error has occurred when access FPS system


Solution:
– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and Mercedes Star Diagnostic recognized FPS1/VIN code.
or
– enter the DAS ATEGO truck come and place manually and then it will work perfect
” Another problem is : “Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with MB SD C4 DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.”
I done the Access special settings , and it working perfect now!

Why Dell D630 is necessary for MB SD Connect C4 Diagnosis

Nowadays, MB SD Connect Compact 4 Plus Dell D630 is favored by the Mercedes owners.
But there are lots of people puzzled whether it is necessary to buy Dell D630 laptop for MB SD C4.
Recently, we obd2tool.com customer service have searched a great deal of customer feedback from different forum, and here are some of them.
—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for MB Star C4 SD Connect purposes…
bought an older Dell D630 with a serial port and plan on buying MB SD Star C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.
Star Diagnosis
C3 Star/ C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.
If your ever in the market for a faster SDS laptop, the Dell 630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.
—I advise buy SD Connect 4 which is connected with LAN cable rather than COM-port as Star C3. And pick up Dell 630 laptop if you are new to Mercedes daignosis, because all latest software (current 2015.7V) are pre-installed.
Picture
—the HDD that is pre-loaded with the software for MB SD CONNECT C4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.
Picture
— C4 are favorable to get with a pre-installed drive that fits inside a Dell laptop.
Picture

VXDIAG MB SD Connect C6 MB Star C6 Benz Diagnostic Tool with DOIP&AUDIO Function Better than MB STAR C4C5

Original VXDIAG For XENTRY Diagnosis VCI VXDIAG For XENTRY Diagnosis DoIP Pass Through Interface
VXDIAG For XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB STAR C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.
XENTRY Software Show:

VXDIAG MB SD Connect C6 XENTRY Diagnosis VCI Overview:
Compatible Software: XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP(You must have an account online)
Functions: Star Diagnostic & programming (SCN Coding)(You must have an account online)
VXDIAG MB SD Connect C6 XENTRY Diagnosis VCI Features:
1.VXDIAG For XENTRY Diagnosis VCI can be used for all model series of For Mercedes For Benz vehicles
2.VXDIAG For XENTRY Diagnosis VCI support DoIP, cover more functions during SCN Coding than SD C4/C5
3.VXDIAG For XENTRY Diagnosis VCI functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
4.VXDIAG For XENTRY Diagnosis VCI Diagnosis updates no longer necessary – firmware updates required on rare occasions
5.VXDIAG For XENTRY Diagnosis VCI does not need a power supply unit for external power supply
6.VXDIAG For XENTRY Diagnosis VCI Handy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
7.Engines (All Gasoline & Diesel Systems)
8.Transmissions and Electronic Selector Modules
9.Airmatic and Active Body Control Suspension Systems
10.Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
11.Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
12.Drive Authorisation System
13.Sam (Signal Acquisition) Modules
14.Electronic Ignition System (EIS)
15.Pneumatic System Equipment and ATA functions
16.Air Conditioning / climate control Systems
17.Instrument Cluster
18.Tyre Pressure Control
19.Parktronic System
20.Keyless Go
21.D2b Command & Audio Gateway (D2B and MOST networks)
22.TV Tuner
23.Headlamp Range Adjustment
24.Seat Electronics
25.Rvc, RST & Vario Roof modules
26.Automatic Clutch System ACS
27.M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
28.Assyst & ASSYST + systems

XENTRY Diagnosis VCI Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.




Notice:
1.If you choose it without laptop,please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.You also can watch more videos to get more technical support from official website:
http://www.vxdiag.net
3.This VXDIAG can/’t support All Key Lost,needs one key at least.
Specification:
Item State
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light,indicate power and status.
Power DC 9V-36V
Consumption 3W
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year
Package list:
Package 1：
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x 500GBhdd

Package 2:
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x second hand Lenovo T410 laptop (4GB Memory I5 CPU and 500GB HDD)

Package 3:
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x new EVG7 Tablet laptop(4GB Memory and 500GB HDD)

VXDiag MB SD Connect C6 support add more original software in feature, you only need buy authorization from us. Already released original software authorization has：
GM,Ford,Mazda,Toyota,Honda,LandRover,Jaguar,Subaru,Volvo,VW,and Porsche.

If you need above softwares,please contact us:sales@obd2tool.com

CGDI BMW update for G F E programming & coding

CGDI BMW update Engineer function: programming & coding for almost all  G series, F series, E series.
Part1: CGDI BMW programming list:
Testable BMW models:
1)E60(E60\E61\E63\E64
2) E65(E65\E66\E67\E68)
3)E7O(E7O\E71\E72)
4) E89(E81\E82\84\ E87\E88\E90\E91\E92\E93)
5) R56(R55,R56,R57,R58,R59,R60,R61)
6) F001(F001,F002,F003,F004,F007,RRO4,RRO5, RRO6
7) F010(F005,F5006,F010,F011,F012,F013,F018)
8) F020(F020,F021,F022,FO23,F030,F031,F032,F033
F034,F035,F036,F080,F082,F083,F087,F088)
9) F025(F015,F016,F025,F026,F085,F086)
10) FO56(F039,F045,F046,F047,F048,F049,F052, F054,
FO55,F056,F057,F060)
11) G070(G070,G071)
12) I001(1001,1012,1015)
13) KO01(K010,K018,K019,KO21,KO22,K023,K032,
K033,K034,KO35,K045,K046,K047,K048,K049
K050,K051,KO52,K053,KO54,K061,K067,K069
K080,K081,K082,K083,K084)
14) KEO1(K017)
5) M013(M013)
16) KSO1(K002,K0O03,K008,K009,K060
17) S15A(F090,F097,F098,G001,G002,G011,G012,
G013,G030,G031,G032,RR11,RR12,RR31)
18) S15c(G008,G038)
Supported modules
Support the modules communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc.
The unsupported modules: the modules that need Fiber Optic CAN bus and the other bus lines, such as: multimedia display, radio, car information computer etc.
Functions
Program the BMW car modules.
Can reprogram the broken module if the module can be communicated.
Automatically read and display the car model and VIN number.
Part2. Coding for BMW G F E
Testable BMW models:
1) E60(E60\E61\E63\E64
2) E65(E65\E66\E67\E68)
3) E7O(E7O\E71\E72)
4) E89(E81\E82\84\ E87\E88\E90\E91\E92\E93)
5) R56(R55,R56,R57,R58,R59,R60,R61)
6) F001(F001,F002,F003,F004,F007,RRO4,RRO5, RRO6
7) F010(F005,F5006,F010,F011,F012,F013,F018)
8) F020(F020,F021,F022,FO23,F030,F031,F032,F033
F034,F035,F036,F080,F082,F083,F087,F088)
9) F025(F015,F016,F025,F026,F085,F086)
10) FO56(F039,F045,F046,F047,F048,F049,F052, F054,
FO55,F056,F057,F060)
11) G070(G070,G071)
12) I001(1001,1012,1015)
13) KO01(K010,K018,K019,KO21,KO22,K023,K032,
K033,K034,KO35,K045,K046,K047,K048,K049
K050,K051,KO52,K053,KO54,K061,K067,K069
K080,K081,K082,K083,K084)
14) KEO1(K017)
5) M013(M013)
16) KSO1(K002,K0O03,K008,K009,K060
17) S15A(F090,F097,F098,G001,G002,G011,G012,
G013,G030,G031,G032,RR11,RR12,RR31)
18) S15c(G008,G038)
Supported modules
Support the modules communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc. The specific module will be known according to the car’s configuration information.Functions
1) Backup & coding, restore coding, coding etc.
2) To set code for the module after the car module is programmed or replaced.
3) Automatic read and display the car model and VIN number.