2019 Lonsdor K518S VS K518ISE

The same: IMMO capabilities + Vehicle coverage.
The difference: The update subscriptions, Lonsdor K518S offers 3 optional subscriptions.
Key Programmer Lonsdor K518S:
1.Basic packagewith lifetime update
2.fullpackage (free update for first 6 months) + one-year subscription(800USD)
3.lifetime update subscription(not incl. the cost of hardware and basic package)
PDF: Lonsdor K518S function list
***
The parts with black words are free forever.
The red parts need money.
Lonsdor-K518ISE-1
Lonsdor K518ISE (English version):
1: basic package (free lifetime)
2: one-year subscription(630USD)
Lonsdor K518ISE Key Programmer feedback 2019 = K518S feedback
1. New 3 month trial period for certain special function.
I used it for Megane 3 with Smart Card system. Programmed key card in 2 minutes. No need pin code or anything….
Seems they have finally got a good competition for the Zedfull…..
2. Mégane 3 RS 2010, 4 buttons card, hands free. Cards programmed 2 mins, Starts/stops, opens/closes, and the hands free works too with factory cards
3. Fiat doblo 2017. Program key ok And disabled key lost
Honda accord 2012. Add key ok
4. Renault master3 2012 add key ok
5. BMW 1 F25 2012 fem add Key ok
6. Read pin add key Peugeot 208 2014 ok
7. Mazda cx9 2015 add key 4d-63 80bit ok
8. -renault espace 2008 added 2 smart cards with no error, after finished the 2 cards were not recognised did not start car or work central locking took long while, 5 minutes per card, MVP coded all cards in under 30 seconds, working perfect…
9. – I made cas 2 one week ago no problem at all i made key in slot off lonsdor max 5 min
10. -Personaly I never had issue with BMW cas 2/3 with lonsdor
11. – Volvo v50 2005 add key and remote ok
12. -Good news !! New update is good for MQB key !! Work fine add key on golf mk7 2015 ! Very fast and easy !!! Bravo !!
13. Mitsubishi space wagon 2003, precoded id61 and programmed key ok.
14. Corsa E (2016) read PIN (BCM) = OK
15. VW Amarok 2016 add key ok and backup eeprom
16. IAT 500 2008 Read Pin code and preapre remtote key than program. ALL FINE
17. I have start loving this toy when i bought it was working 20% ok 80% not Now it is 95 – 5. Today megane 3 year 2009 keyless key made job in 2minutes
18. Porche Panamera 2010 km adjust obd job done
19. hyunday i20 2015 year
read pin ok
add key ok
20. Citro?n c5 2008 read pin add key ok
307 Kline read pin fail / add key ok
21. 206 kline all key lost read pin ok about 3sec
22. Opel Zafira b read pin add key
23. Touran 2006 learn key and remote ok
24. Zafira B, read pin and add key, – Success (note, this failed under Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)
25. Peugeot 607 2006 abrites won’t connect with BSI to read pin and key learning too .
Lonsdor read pin and program key 2 min .
26. Renault Fluence 2015 keyless go works excelent,in fact,zed full asks for pin and Lonsdor doesn’t.The key works ok in central module and keyless go,5 min job.
27. Suzuki Swift 2015-> (pcf7961)
all key lost
28. Program without pin – OK (2min)
29. Ford focus 2006 year
add key (all key lost) work all ok
30. Suzuki Swift 2013 all key lost – OK
31. Ford kuga smart spare key….ok, max 5min job
32. i30 2009 all key lost pin i key(7936) ok
33. grand cherokee 2014 add smart ok
34. Lonsdor K518 Jeep Grand Cherokee 2015 Smart Key programming definetely. Read eeprom, calculate pin code OK.
35. Berlingo 2014 all key lost pin read ok
36. Fiesta 2013 keyless ok
37. Mazda 3 2014 add Smart key OK. All keys lost also OK.
I20 2014, read pin without working key and program key OK.
38. 2012 Ford Transit T350 2.2 RWD
AKL ok
Add Keys ok
39. Today Megane 3 year 2009 keyless key made job in 2 minutes.
40. Lexus 2007 all smart key lost.Black: SKE-LT-DST40(94/D4) – Supports 94/D4 smart key
41. Programmed ok.
42. Dokker 2015 failed – request incode.
43. OPEL COMBO (2005, ID40) : Pin ok, type3
Program new key ok
remote ok, through meriva (paid function)
Basically for all OPEL that i tried ( astra h, corsa c, combo id40, zafira b ), i got pin trough type3, nothing else worked
44. Done spare key Opel Corsa E 2016
10 minute job
45. ford ecosport 2014 add smartkey ok
dacia sandero 2009 add key ok
46. Honda civic 2016 ok
Ford Kuga 2017 Fail
47. Mazda CX-5 2017 USA
Add key – OK
Time – 7min
Jeep Grand Cherokee 2014 USA
Add key – OK
Time – 3min
48. Europe:
OPEL CORSA C: Pin OK under type3 (fail under corca c menu), add key OK, remote fail (done with zed-full)
HONDA H-RV 2015 immo+remote OK (IMMO TYPE 2)
OPEL ASTRA H: Pin OK (type3), add key+remote OK.
Strange thing, corca c with id40 and astra h with id46, worked under the same option, type 3.
49. AUDI A5 2010 immo5 AKL
Read BCM2 and Learn key = Pass
50. Hyundai I20 2010
Read Pin =FAIL (used vvdi key tool to get pin)
Program Key = Pass
Program Remote = Pass

Lonsdor K518ISE Program Seat Leon 3Fr MQB 2014 Key Success

New test report:
Seat Leon 3Fr MQB 35XX 2014 successfully programmed by Lonsdor K518 key programmer in 3-4 minutes.

customer have only one working key
It is clasic flip key, no keyless
if your car have johson control instrument cluster, K518 is not supported..I failed in a Octavia 3.

How to Program Porsche Cayenne 11-15 Smart Key With Lonsdor K518ISE

Here’s the instruction on programming smart key card to Porsche Cayenne from year 2011 to year 2015 by using Lonsdor K518ISEcar key programmer (Lonsdor K518 English version).
Function

1. Program smart key: to program smart card (please make dealer key first);
2. Make dealer key: use the backed up BIN data to make the non-dedicated key to be dealer key.

Reference
Chip type: Dedicated smart card
Frequency: 315/433/434 frequency (please check the logo in the lower right of the lid of the BCM box)
Key embryo no.: 31
Code requirement: Dismantle & read BCM to make dealer key
Key generation: Program smart key complete, remote will automatically generated
Under the steering wheel (BCM position):

BCM is located at the bottom left of the steering wheel, please note the frequency type, basically there will be 315/433/434,
The following picture is for 434 frequency:

2011-2015 Cayenne Car Model

The car key

The induction keyhole

The mechanical knob key inserted into the induction keyhole

Attention

1. All the keys need to learn, or it will not be able to start the vehicle, it is recommended to learn the original car keys first,and then learn the new key, battery must be well installed.
2. The newly added key must be either the dealer key made via the car BCM data, or the key ordered back through the VIN code.
3. When learning key, it is required to insert the key into the induction keyhole, to learn a smart key, remove the machanical rotate key from the induction keyhole if any and then insert the smart key to program.

Operation
Step 1: Use the programmer to read and write BCM data and save it as bin file;

1. BCM is located in the lower left of the steering wheel, please pay attention to view the frequency type, usually there will be 315,433,434 frequency (below picture is for 434):

2. Read the BIN (D-FLASH / EEPROM) file with the VVDI PROG programmer specifically for reading BCM. Please pay attention to the type here: namely 1L15Y 2M25J metal crystal, or 5M48H 1N35H ceramic crystal (red mark):
3. Please refer to the following picture to wire:    

Step 2: Copy the bin file into Lonsdor K518ISE car key programmer:please use the USB cable to connect the K518ISE to the computer, open the device internal memory, find the folder “customfile” and copy the bin file into it (as shows below).
Note: bin file suffix “bin” must be lower case letters, directly put the file into the folder rather than create a new folder:

Step 3: Make dealer key
Step 4: Program smart key

http://obd2tool88.egloos.com/6276250

Lonsdor K518 Program Mazda3 Alexa 2017 Smart Key

Guide to add smart key and program all keys lost on a Mazda3 Alexa 2017 by Lonsdor K518 key programmer via OBD.
Key information:
Chip type: special smart card
Frequency: 433MHz
Pin code: No
Remote generation: smart key programming completed will generate remote automatically
Device to program: Lonsdor K518ISE (English version of K518)
OBD location: Under the steering wheel


1: Add smart key
Connect K518 from Obd2tool.com host with vehicle via diagnostic socket
Select Immobilizer->Mazda->Alexa
Communicating…
K518 read part number

Turn ignition switch to ON position

K518 identified key programmed: 2

Communicating…
Stick the non-registered smart key on the Start button

Programming…
Automatic model please step on the pedal brake
Manual model please step on the clutch

Programming…
Identify key programmed: 3

Turn ignition OFF
All programmed key must perform following operations:
Step on pedal brake, press on Start button with remote key with car logo mark and start turn IGN ON
Turn IGN OFF after 3s

Program success

1: All keys lost
Connect K518ISE host with vehicle via diagnostic socket
Select Immobilizer->Mazda->Alexa
Communicating…
K518 read part number
Require at least 2 keys

Turn ignition ON. If cannot switch ignition on, please press on Cancel button

Communicating…
Key programmed:3

Communicating…

Lonsdor K518ISE identified key programmed: 0

Turn ignition OFF

Hold non-registered smart key in hand

Turn ignition ON
Stick 1st smart key with logo on the Start button

Programming…
Key programmed:1

Turn ignition off
Hold non-registered smart key in hand
Turn ignition ON
Stick 2nd smart key with logo on the Start button

Programming…
Key programmed: 2

Turn ignition OFF
All programmed key must perform following operations:
Step on pedal brake, press on Start button with remote key with car logo mark and start turn IGN ON
Turn IGN OFF after 3s

Program success.

http://obd2tool88.egloos.com/6259755

How to read VW Pin code with Lonsdor K518, Xtool X100 Pad2 and VVDI2

There are several tools available to read pin code and program key for VAG group. Here are the demo guides to read pin code for VAG.
 
1) Read VAG Pin Code with Lonsdor K518
Lonsdor K518ISE Key Programmer comes with built-in Volkswagen 4th & 5th adapter, so it can read pin code and program key for VAG 2th, 3th, 4th, 5th Immobilizer by OBD directly.
Vehicle tested:
VW Santana 3000 year 2010 with 44 chip
Connect Lonsdor K518 with vehicle
Select Immobilizer->Volkswagen->2th& 3th Immo->Read Pin code->Engine


Turn ignition ON
Reading pin code…

K518 will read VW VIN, PIN and CS after 5 seconds.

2)Read VW Pin code with XTOOL X100 PAD2
To read pin code and program key for VAG 4th 5th Immo, you need Xtool KC100 VAG 4th 5th Immo adapter to work with.
main steps:
Select VW/Audi/Skoda/Seat->4th 5th Immobilizer system
Turn ignition on
select 4th immobilizer
select instrument tyye
Turn ignition on
read immo code

Read pin, cs, vin success
3) Read Pin code with Xhorse VVDI2 VAG
all user of VVDI2, you can provide serial number to activate authorization for EDC17 and MEV17 for online CS calculation.

https://obd2tool.tian.yam.com/posts/210654501