CGDI Prog BMW and Mercedes Key Programmer Test Report

CGDI Prog MB Mercedes and CGDI Prog BMW are two different tools from the Obd2tool.com whom manufactured CG100 airbag reset tool.   How they works? See the test reports with photos.
CGDI Prog BMW
CGDI Prog MB Mercedes
1.CGDI Prog BMW program X6 BDC key via OBD
CGDI BMW program 5 series CAS4+ key success

BMW 325 key added done. Pls update CGDI BMW to latest version if you need to do CAS 9389115  version



2.How to read MSV80 by key programming machine CGDI Prog BMW Key Programmer
CGDI BMW adds BMW X3 spare key by OBD success

CGDI Program BMW M4 FEM smart key success


CGDI Prog BMW add key to a 2016 BMW X5 successfully

CGDI Prog BMW program key to 2016 BMW 5-Series

CGDI Prog BMW program key to BMW 523Li



CGDI Prog BMW FEM all key lost: Done!

In conclusion,
1). CGDI Prog BMW MSV80 is able to add new keys to BMW CAS1/CAS2/CAS3/CAS3+, CAS4/CAS4+ ,FEM/BDC and program keys/all keys lost,
CAS computer replace,
CAS3+/P4X or newer version can directly downgraded by OBD in 5 minutes 100% safety.
2). support BMW key inspection, check key status
3). support BMW engine computer DME replacement.
4).  support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)
5).  support BMW key unlock.

http://lovecartools.webnode.fr/news/cgdi-prog-bmw-and-mercedes-key-programmer-test-report/

How to Program BMW F30 FEM Key with CGDI Prog Key Programmer

Here’s the little guide on programming key on a BMW F30 FEM system with CGDI Prog BMW MSV80 Car Key Programmer.
Device required:
CGDI Prog BMW key programmer
BMW FEM/BDC Test Platform for BMW  F20 F30 F35 X5 X6 I3
Preparation:
Disassemble the FEM/BDC module from vehicle
Procedure:
Connect BMW FEM/BDC test platform with CGDI Prog and FEM/BDC module from Obd2tool.com



Open CGDI Prog BMW software

Select FEM/BDC Key Match

The current FEM BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power supply. Please do not disconnect cable connection during programming procedure.

Please remove the FEM BDC and then use the programmer to read and save the data from the
95xxx EEPROM chip on the FEM/BDC computer board, then click “Next”

Please read the original car EEPROM data




Read eeprom data with Key Programm Tool, i.e Orange 5 eeprom programmer
and save data


User the programmer to write the calculated new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next

Click OK to write M95128
User the programmer to write the calcutaed new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next
Power on BMW FEM BDC test platform
The yellow indicator will flash


Coding is being backed up
The ECU is being programmed
and verify flashing


Program BMW F30 FEM key success

http://www.freewebsite-service.com/obd2tools/Blog.php?id=1091250&snavn=How+to+Program+BMW+F30+FEM+Key+with+CGDI+Prog+Key+Programmer