How to choose a best Yanhua BMW FEM BDC Key Programmer

New! Yanhua BMW FEM BDC Key Programmer is newly released at Obd2tool.com, it is able to program BMW FEM keys up to 2017 year. Below parts incl. its vehicle coverage, user tips, update and several YH BMW F Series CAS4+/FEM Blade Key 315MHZ / 433MHZ in different colors.

Yanhua BMW FEM Auto key programmer coverage (Up to 2017 year):
1 Series             F20/F21                    2011-2017
2 Series             F22/F23/F45/F46            2014-2017
3 Series/GT          F34/F35                    2012-2017
4 Series             F30/F31/F32/F33/F36        2014-2017
X5                   F15                        2014-2017
X6                   F16                        2015-2017
How to use Yanhua BMW FEM Key Programmer?
1.allows offline operate with easy and stable.
2.Need no tokens
so, don’t you think it is easy to operate.
Update: update on Yanhua official site http://www.autoemaster.com/
Where to get one Yanhua BMW FEM Key Programmer?
Not from Yanhua official site, but from the authorized dealer especially the one deal in Yanhua products for many years e.g. www.obd2tool.com. If you are preparing charging 500 tokens for Yanhua Digimaster 3, this adapter is free of charge.
YH BMW FEM Key Program Blade Key
http://www.obd2tool.com/goods-6918-Original+Yanhua+BMW-FEM+BMW+FEM+OBD+Car+Key+Programmer+Update+Online+No+Need+Token+Support+BMW+Till+2017.html

how to update SKP1000 key programmer

Here is show how to update skp1000 key  programmer
Take out the TF card and insert it into the card reader
plug into the computer USB port
go to My Computer/local disk (H:)
“Format” disk H:
Tip: Tick on the “Quick format” and click on“Start”
format completes
go to the official site to download the update file
then copy and paste the file into the TF card
plug the TF card into the machine
power on the machine to the main interface

click on “Firmware update”

choose “System firmware update”, press “Yes”

Update successfully

Press “No” to back.

go to ” Adapter firmware update”
after finish, reboot the machine for use


Done

http://cheapobd2.com/2017/09/14/how-to-update-skp1000-key-programmer/

How to Reset Mercedes SRS Light by Autel MaxiDas DS808

Have SRS warning light on, my car is 2004 Mercedes Benz C240 Gasoline, VIN WDBRH81J74F499208, I am using Autel Maxidas DS808 full version diagnostic system bought from obd2tool.com to turn off the airbag light on. Following parts are procedure.
Turn on DS808

Slip the unlock key to the function menu, click “Diagnostics”

As you can see I have Mercedes Benz SRS warning light on.

Autel MaxiDAS DS808 Automatically read out the VIN

Choose “from 09/2003-12/2007”

Press Button Left to select: Left-hand steering.

Confirm vehicle information

Choose “Body”

Choose “AB-Airbag”

Communicating…

http://forobd2tool.com/blog/2017/09/08/how-to-reset-mercedes-srs-light-by-autel-maxidas-ds808/

How to Unlock and Add Toyota VXR V8 Smart Key

Guide to unlock and program smart key on a 2016 Toyota Land Cruiser VXR V8 5.7 4×4.

The solution was provided by a Chinese locksmith A Jie.
Problem:
A customer bought a Toyota Cruiser VXR V8 5.7 in Aug, 2016. When came back home he found one of keys did not working, could not start the vehicle. He came me for help.
Diagnose:
Check the key frequency and chip type with ND900 key copy machine from obd2tool.com. It showed key’s programmed, so the smart key is okay.


Analysis:
1. The smart key has been programmed but not been learned
2. 4S store gave you the wrong key (the key is not for this vehicle)
How to check:
Method 1:
Program/learn the smart key by using SKP1000 Tablet car key programmer. Unfortunately, skp-1000 failed to learn key. So the smart key is not correct key for this vehicle.  You should get the smart key unlocked and programmed. Go and check method 2.
Method 2:
Step 1: Unlock Smart key
Unlock the smart key with Xhorse VVDI2 key programmer or ND900 Mini


Perform Blank Check,  key indicator will flash within 5 seconds if VVDI2 unlock success

Again use Mini ND900 to check the unlocked smart key.
It shows not been programmed

Unlock smart key done.
Step 2: Add/Program smart key
Connect SKP1000 key programmer with vehicle via OBD socket
Select Immobilizer function- >select Toyota->Smart key CANBUS-> Smart key system

Choose OBDII connector
Turn ignition ON
Press YES to continue

Press the Start button

Put the registered smart card into coil.
If hear a beep sound, take away the smart card

Select Add smart key

the working key is close to the emergency starting induction antenna

Change a new smart key and put it into the coil
Press YES to continue

the new smart key is close to the emergency starting induction antenna

Configuring…

Program/Add smart key success

Test the new smart key.

http://lovecartools.webnode.fr/news/how-to-use-skp1000-to-program-koleos-2015-smart-card/

Ksuite 2.21 Kess v2 tested ok on BMW E90

Got the new Ksuite v2.21 for KESS V2 V5.017, and tested successfully on BMW E90. and here is the tested result.
Free Download
ksuite-v2.21.zip  (6,005.0K, please contact our customer service to get it)
Note : No network connection & No firmware update (FW: 4.036 only) !!
Ksuite v2.21 installation reference:
KESS v2 Ksuite 2.21 update information:
CAR
* New Family 527 (PORSCHE CONTINENTAL SDI6 CAN)
* New Family 528 (PORSCHE CONTINENTAL SDI7 CAN)
* New Family 529 (PORSCHE CONTINENTAL SDI8 CAN)
* New Family 530 (PORSCHE CONTINENTAL SDI9 CAN)
* New Family 531 (MAZDA DENSO RENESAS SH72543 PETROL CAN)
* New Family 533 (VAG BOSCH EDC17CP54 CAN)
TRUCK
* New Family 534 (CUMMINS GENERIC CONTINENTAL CM2220C CAN)
Tested model:
BMW E90



(edit: OBD2TOOL will test ksuite 2.21 on ktag and report here)
A customer feedback his BMW problem,and we share solution below:
BMW e91 318d read write EDC17 c41 DDE8 error with KESS V2

http://hmilycar.doodlekit.com/blog/entry/4204598/bmw-e91-318d-read-write-edc17-c41-dde8-error-with-kess-v2

MB SD Connect C4 WIFI set on WIN10 laptop Xentry 03.2017 OK

Here share with you a personal tested guide, hope it helps and try your own risk!
How to set up MB Star C4 Wireless on a Dell XPS15 9550 laptop WIN10 and run Mercedes Xentry 03.2017 software?
I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.
After days of investigation and testing, the most important thing is that: The drivers for your wireless card MUST support AdHoc functionality.
This can be verified at the DOS command prompt. The command is: Netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.
Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.
The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.
Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These automotive diagnostic equipment entries were not visible using the Win10 drivers.
AdHoc can now be verified at the DOS command prompt. The command is:
Netsh Wlan show drivers.
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly
With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity.
This is what worked for me. Depending on your computer skills, your results may vary.
P.S. Recommend to get  MB DAS Xentry HDD 03.2017 for WIN7 or WIN10, WIFI set on WIN10 100% OK!
http://lovecartools.webs.com/apps/blog/show/44769434-download-2017-5-xentry-das-for-mb-sd-connect-good-source-100-works-